DSLRKIT 12V 102W 9 Ports 8 PoE Injector Power Over Ethernet Switch 4,5+/7,8-

$37.04

Add to Wishlist

Computer & Office

Product Description


This is a special PoE Switch with 12VDC out, it can not Compatible with 802.3af (48v). It could work only on the picture Method:
This POE switch only support 10/100M connection, do not support gigabit ethernet connection, because "Power Link 1~8" port using 4,5,7,8 pin as power transfer, Please do not connect any gigabit ethernet device on "Power Link 1~8" port, this will damage your device.
The switch is 10 / 100mbps Ethernet Fast switch, if it connects to Gigabit ethernet Uplink device, you only can access "Up link" port, Please do not access "Power Link 1 ~ 8", this will damage your device.
Midspan Mode-B Unsolicited Power pin(4,5+/7,8-)
Specification: ALL Port: Standard 10/100Mbps Ethernet port. Support 10Mbps Ethernet and 100Mbps Fast Ethernet, can operate in full-duplex or half-duplex mode,must work with 4 pairs UTP Cat5/5e/6 cable . Power Link Port 1-8: Unsolicited power on pairs (4,5+/7,8-) pins, 12V Power LED LED ON: power on. LED OUT: power off Yellow Light LINK/ACT LED ON Indicates the port is connected to a network device and has been started LED OFF Indicates that this port is not connected to a network device or has not been started Standard IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3x Full-Duplex flow control Protocol CSMA/CD Ethernet Data Transfer Rate Ethernet: 10Mbps (Half Duplex) , 20Mbps (Full Duplex) Fast Ethernet: 100Mbps (Half Duplex) , 200Mbps (Full Duplex) Network Media(Cable) 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100 Ω STP (maximum 100m) 100Base-TX:UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100 Ω STP (maximum 100m) PoE Power on RJ45 Power +: pin 4 & pin 5 ; Power -: pin 7 & pin 8 DC Output: 12V, 8 POE ports Total 8.5A(Max. 102Watt) Number of Ports 9 x 10/100Mbps Auto-Negotiation RJ45 ports with 8 PoE enabled (port-1 ~ port-8) AC Power Adapter AC Input: 100V ~ 240VAC, 50Hz ~ 60Hz. DC OutPut: 12V/8.5A Power Consumption 3.2 Watts (max. no PD connected) According to the actual power consumption of equipment Temperature Operation Temperature: 0 ~40 degree (32 ~104 ) Storage Temperature: -40 ~70 degree (-40 ~158 ) Humidity Storage Humidity 5%~90% non-condensing, Operating Humidity 10%~90% non-condensing Product Dimensions 197mm W x 73mm D x 32mm H RAM Register Capacity 64K bytes per device MAC Address List 1K entries per device F rame Forward Rate 10Mbps Ethernet: 14880pps/Port 100Mbps Ethernet: 14880pps/Port

DSLRKIT MID8P1U 12V Passive PoE Injector Switch
Features: 5 x 10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 8-Ports PoE function Midspan Mode-B Unsolicited Power(4,5+/7,8-) Supports PoE power up to 102W for all PoE ports. Each port supports auto MDI/MDIX, so there is no need to use cross-over cables. Full/half duplex transfer mode for each port
12V Power Over Ethernet Max cable length of 30 meters
If your camera is with the word “12V/PoE”as below picture shows,please choose to buy 48V PoE switch or the switch in comply with 802.3af /at standard, Please please do not buy 12V PoE switch. Because "12V/PoE" means it can offer power supply to camera via 12V DC port or PoE Ethernet port.

Product Review


No customer reviews for the moment.

Add a review

Additional Information


Unit Type piece
Package Size 18cm x 16cm x 12cm (7.09in x 6.30in x 4.72in)
Brand Name Dslrkit
Package Yes
Switch Type Ethernet
Number of Interfaces 9
Model Number MID8P1U
Communication Mode Full-Duplex & Half-Duplex

Related products