Encoding Type: Learning Code
3.Working Temperature: -10\'C—+80\'C
Latched -------Jumper on "1&2"
Momentary -----Press the transmitter button A,the receiver relay A is ON; Release button A ,The receiver relay A is OFF ,The same as B/C/D
6.Output State: Switching Value
6* transmitter (with battery)
Press transmitter button C,the receiver relay C is ON,the relay A/B/D is OFF
It mean ,Latched only can keep 1CH ON,and it will ofen have 1CH is ON
9.Case Size:75 * 55 * 30mm
Model : DK-4TC
Keeping press the learning button 8 seconds until the LED indicator OFF, It mean the code have been cleared successfully.
Press transmitter button A,the receiver relay A is ON,the relay B/C/D is OFF
2.Current:Standby less than 6mA, Working less than 128mA
Add transmitter by the Learning Button on the receiver
Toggle --------Jumper on "3&4"
Output State: It is adjusted by the Jumper on the Receiver Board,