2. Protect the stone well and avoid it falling from the height.
Step 1: 1000 grit coarse grit, used to repair the seriously damaged edge, suitable for blunt knives.
Item no.s MDS100, this sharpener set is with high quality,perfect design, High-grade corundum ensure effective sharpening results Double-sided sharpening design(1000 grit coarse grinding and 3000 grit fine grinding) Equipped with silica gel non-slip base guarantee the safety sharpening Stone Size:approx. 180mm x 60mm x 25 mm (7" x 2.4" x 1.1") Stone Weight:approx.650g Knife Angle Guide,size:100mmx20mm
After sharpening the tool, it needs to be honed with coarse grinding after half a year. Also depends on the specific situation.
Use more gentle pressure, repeat step 1, and repair the edge until smoothly and keenly.
The sharpening angel holder with the ceramic guides provides for the angel of 15-30 degrees depending on the width of 2 cm is 30degrees. The wider the blade is the less is the angle.
1. Please use the whole surface of stone to keep the consistency when sharpening knives.
General speaking, use it once a week to keep your blade sharp.
4. Please put the knife sharpener and knife beyond the reach of children to avoid any accidents.
Dual Sided1000&3000 Grit Professional Kitchen Knife Whetstone Sharpener + Anti-slip Silica base holder +Knife Angle Guide Specifications
3. Sharpening result would be much better using with sharpening oil.
Hold the knife at an angle of 15 - 30 °, grind the edge on the surface of stone back and forth with gentle pressure, and sharpen it until the edge sharp enough.
Warranty , Quality guarantee: •ISO9001:2008 Suitable for: Household; hotel and restaurant Please wipe it with wet cloth or srinse it with water after sharpening the tool, and then dry it. Clean the stone surface with a soft brush and put it in the air to make it dry.