Pixhawk PX4 Pixpilot v 2.4.7 / Pix v 2.4.8 open-hardware Autopilot Neo M8N GPS Minim OSD 433 Telemetry

$101.42

Add to Wishlist

Product Description


1 .5 high voltage compatible UART 1, 2 with hardware flow control
Specifications:
- Redeveloped and optimized circuit without changing components - Could use Official MissionPlanner, ECLIPSE firmware upgrade Features: - 168 MHz / 252 MIPS Cortex-M4F - 14 PWM / Servo outputs (8 with failsafe and manual override, 6 auxiliary, high-power compatible) - Abundant connectivity options for additional peripherals (UART, I2C, CAN) - Integrated backup system for in-flight recovery and manual override with dedicated processor and stand-alone power supply (fixed-wing use) - Backup system integrates mixing, providing consistent autopilot and manual override mixing modes (fixed wing use) - Redundant power supply inputs and automatic failover - External safety switch - Multicolor LED main visual indicator - High-power, multi-tone piezo audio indicator - microSD card for high-rate logging over extended periods of time Specifications: Processor - 32bit STM32F427 Cortex M4 core with FPU - 168 MHz - 256 KB RAM - 2 MB Flash - 32 bit STM32F103 failsafe co-processor Sensors - ST Micro L3GD20H 16 bit gyroscope - ST Micro LSM303D 14 bit accelerometer / magnetometer - MEAS MS5611 barometer Interfaces - 5x UART (serial ports), one high-power capable, 2x with HW flow control - 2x CAN (one with internal 3.3V transceiver, one on expansion connector) - Spektrum DSM / DSM2 / DSM-X® Satellite compatible input - Futaba S.BUS® compatible input and output - PPM sum signal input - RSSI (PWM or voltage) input - I2C - SPI - 3.3 and 6.6V ADC inputs - Internal microUSB port and external microUSB port extension Power System and Protection - Ideal diode controller with automatic failover - Servo rail high-power (max. 10V) and high-current (10A+) ready - All peripheral outputs over-current protected, all inputs ESD protected components: D1002 and F1002 - D1002 model: PMEG2005CT - This version of flight control can solve the problem of small supply current for receiver, and the flight control system halted caused by overcurrent supply Package Included: - PX4 V2.4.7 Flight board x1( with origianl DF13 connector, send as your choice ) - safety switch x1 - Buzzer x1 - Original Case x1 - SD Card x1 (PIX 2.4.7 with 8GB SD card) - SD Card Adapter x1 - External LED light board X 1 - PPM Module w/ shell x1 - Pixhawk-I2C Splitter Expand Module X 1 - Neo-M8N Gps Module x1 - Black Gps Holder x1 - Power Module x1 - Minim OSD w/ shell x1 - 433 telemetry w/ shell x1 - DF13 4Pin Cable x1 - DF13 5Pin Cable x1 - DF13 6Pin Cable x1
2.LSM303D 3-axis accelerometer 14 / Magnetometer
5.PPM Signal Input
4.Futaba SBUS compatible inputs and outputs
1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
3.MPU6000 6-axis accelerometer / magnetometer
7. Multicolor LED lights;
9. Micro SD recording flight data;
9.3.3 and 6.6VADC input
10. External MICRO USB Interface

6. Provide redundant power input and failover;
Packing list: Pixhawk 2.4.8 32bit ARM Flight Controllerx 1 Safety buttonx 1 Buzzer x 1 ​​​​ 16G TF card (IO firmware has written) x1 Neo-M8N Gps Module x1 Black Gps Holder x1 Power Module x1 Minim OSD w/ shell x1 ( 2 kind of OSD cable send at random) I2C Splitter Expand Module x1 PPM Module w/ shell x1 RGB module × 1 433MHZ telemetry x1 ( send by your choice) 6pin turn 6pin cable x 1 4pin turn 4pin cable x 1 3pin DuPont line x1
Sensor
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
3.32 STM32F103 backup coprocessor
Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
8.SPI
5. Provide automatic and manual modes;
2. 14 PWM / servo output;
Features:

Product Review


No customer reviews for the moment.

Add a review

Additional Information


Unit Type Set
Package Weight 1.0kg (2.20lb.)
Remote Control Peripherals/Devices Motor
For Vehicle Type Airplanes
Use Vehicles & Remote Control Toys
Brand Name Readytosky
Tool Supplies Grinded
Four-wheel Drive Attributes Axle Bearing

Related products