Note:This function means if a card has already exited,it can not exit again without enter.
Note:can setup the door hold open at a specified time,maybe useful during the period of going to work every morning
Note:"N" means quantity of Com ports or RS485 Hub\'s ports
4 doors,Card enter,Button exit
Acceptable Card Readers\' Format
Fire protection &Alarm Trigger
Urgently close Both enter&exit
Single1 Door/Bidirectional Controller
Extensible Card Readers
Alarm when:Door un-closed overtime,unlawful entry or being Threatened
Note:A door can be openned only when 2 or more cards are read(multiple persons are present). This function maybe useful for very important place.
TCP/IP Ethernet Network Access Control Board Controller For 1 Door 2 RFID Reader Technical parameter and Features
2 doors,Card enter,Card or button exit
Double click "setup.exe".After installation,username:ABC,Password:123
Door(s) for control
Note:Door can be set to openned only when both card reading and pin code pressed.
Remote open by software
Max to 100M
TCP/IP 10M/100M Self-adaptive
High speed flash memory,keep data safe without power
Note:you can setup the interrelation between the doors Arbitrarily,such as "only when door A is open &door B is closed,Door C can be openned"
Anti go back convertly,Anti followed
Download Software +Wiring diagram+Software Introduction link below:
PCB*1pcs,CD*1pcs,Manual*1pcs,Certificate*1pcs,Carton * 1pcs
Max Distance from Controller to PC
Max Users Quantity