Tool setting on Lathes
Absolute & relative measurement modes
1 x Soft Protective Pouch with Belt Loop
360°Digital Protractor Inclinometer Angle Meter with Magnetic V-Groove Base
Operating Temperature: -10 ℃~ 50 ℃
Machined aluminum frame
Built-in strong magnet for attaching on metal surfaces
Drainage angles and run-off slopes
Large and clear LCD display
Race car wing and chassis adjustment
Calibrate button to calibrate the meter to any reference surface
Drive line Measurement
3.This product was applies to two-axis measurements, in the third axis ( foot level front and back side) and at the horizontal angle was less than 45 °, the LCD will display an error message "Err".
2.When power is low, the battery symbol flashes, please replace the batteries as soon as possible.
Portable design & simple operation
1.The battery should be taken out for storage if the instrument will be kept idle for a long time period.
Strong magnet is set in the base
Setting work piece angle for milling
Setting blade angle of Circular Saws
Setting blade angle of Miter Saws
Operating Humidity: 40 ~ 80% RH
V-groove base plate with strong built-in magnets